ORC - KALENDARZ

01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
OGŁOSZENIA
05.06.23 - Rejsy
rejs Bałtyk / mała załoga - dużo pływania / prywatny jacht - doświadczony kapitan /23-29.07/
rejs Bałtyk / mała załoga - dużo pływania / prywatny jacht - doświadczony kapitan /8-14.07/
NEWSLETTER

Spinnakers: Symmetric and Asymmetric
The half width of any spinnaker shall be 75 % or more of the foot length.
The symmetric spinnaker shall be symmetric in shape, material and cut, about a line joining the head to the center of the foot. The symmetric spinnaker shall not have adjustable leech lines.
Any spinnaker not qualifying as symmetric shall be considered as asymmetric. Where the asymmetric spinnaker is tacked on the centerline, tack pennants of any length may be used.
Battens are not permitted on any spinnaker. Symmetric spinnaker measurements include: leech length (SL), half width (SMG) as the distance between midpoints on the luff and leech and the foot length (SF). Asymmetric spinnaker and Code 0 measurements include: luff length (SLU), leech length (SLE), half width (AMG) as the distance between midpoints on the luff and leech and the foot length (ASF). The asymmetric spinnaker luff ASL is then calculated as the average of the luff and leech lengths making it possible to use the same formula for spinnaker area:
Symmetric spinnaker area
Asymmetric spinnaker area
![]() |
Kopiowanie i powielanie treści portalu wymaga zgody redakcji Zapoznaj się z regulaminem |